CZ – WODAPLUG 1000 SÉRIE – GIGABIT EOC MASTERS AND SLAVES (HOMEPLUG AV2)

Tato nová verze je založena na čipsetu  MSTAR 1000 a Homeplug AV2 protokolu. Bohužel tento čipset není nyní dostupný a tak je výroba pozastavena, používejte prosím jednotky serie Wodaplug 700Mbps EOC1121 s čipsety od QCA. Wodaplug 1000 EOC master nabízí reálnou propustnost  500 Mbps po existujícím koaxiálním rozvodu na dlouhou vzdálenost až 1km. Spolupracuje s  Wodaplug 1000 AV2 EOC Slave jednotkami.  Pozor – není kompatibilní se Slave jednotkami z předchozí sérií EOC1121. Vhodné pro nové instalace, kde je potřeba vyšší celková propustnost a vyšší počet klientů. Vhodné také pro navýšení počtu připojených klientů ve stávajících rozvodech, a to buď výměnou stávajících EOC modemů, a nebo přidáním nových nezávislých modemů do stejného rozvodu, ale zde je potřeba předpokládat pokles přenosových rychlostí z důvodu sdílení přenosového pásma s již instalovanými EOC zařízeními. Princip instalace a funkce jsou totožné jako předchozí verze,  používané frekvenční pásmo je rozšířeno do 86MHz aby bylo možno navýšit rychlost. Bez potíží a bez rušení koexistuje s TV a SAT signálem.  

Pracovní frekvence je rozšířena na  7.5Mhz-86Mhz (dle AV2) a Physical DataRate je 1000Mbps! Reálná propustnost linky je +500Mbps! 

Zajímají vás test reporty a datasheety ? Tak navštivte http://wifi5.eu/dls/wodaplug.com/EOC-master-slave/Wodaplug1000_EOC/

Wodaplug1000 EOC Master DM1002A

Wodaplug1000 EOC Slave

WODAPLUG 1000 EOC MASTER VLASTNOSTI:

characterisitcs
  1. Podpora 500M bandwidth pokud pracuje v módu 7.5M-86Mhz/AV2 spolu s Wodaplug 1000 EOC slave jednotkami. Pozor – není kompatibilní se Slave jednotkami ze série EOC1121!

WODAPLUG 1000 EOC MASTER TECHNICAL PARAMETERS

ParametersSpecification
Chip1000
Work frequency7.5~86MHz (AV2 mode)
Output Power≥105dBμV
Receive Sensitivity25-30dBμV
RF ConnectorF type Female socket(English system)
Output impedance75Ω
Modulation modeOFDM BPSK QPSK16/32/64/128/256/512/1024/2048/4096QAM
Work mode at MAC layerCSMA/CA,TDMA
Performance Physical layer:1000Mbps
MAC layer: 500Mbps
Throughput rate500Mbps
Eth ConnectorRJ-45
StandardIEEE802.3,IEEE802.3af, 10/100/1000Base-T
Smart bit64Byte~1518Byte
VLANIEEE802.1Q (VLAN lagging)
Security128-bit AES data encryption
QosSupport 802.1PSupport the priority number:8Support different business isolation for different usersSupport different business isolation for one userSupport the isolation between business and software upgrading
EoC SNMPMeet HomePlug AV/IEEE P1901 relative standard
ManagementSupport SNMP, local WEB or CLI interface
Power supplyAC60V
Operating Temp.-20℃~+70℃
Power consumption<10W
Relative HumidityLess than 95%
Gas pressure70kpa~106kpa
No causticity gas, no dust, no magnetic field disturb
In the real operation, there is no filter noise problem. when working at -20℃~+70℃, no hang.

WODAPLUG1000 EOC SYSTEM WEB NETWORK MANAGEMENT

Connect master to PC by any Eth port of master,ensure that the computer network segment and Master network segment are in the same network segment (Master default is 192.168.1.6).

Open IE browser, input Master IP address(192.168.1.6) to login WEB interface. The default system name and password both are admin.

Note: When master is restored to the default settings, IP address is 192.168.1.6

web management
web slave management

WODAPLUG 1000 EOC SALVE (AV2), INDOOR, 2*F CONNECTOR, 4*LAN 10/100MB

This new MSTAR 510CE chip Homeplug AV2 based  EOC Slave can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1000 AV2 EOC Master. 

1000M EOC Slave is the terminal device in this system, it offers 4 FE ports, build L2 Ethernet transmission channel in the cable network, to transmit internet signal, but not affect the original CATV signal at the same time.

It has the advantages of long transmission distance, good network adaptability and high bandwidth.Interested in test reports and datasheets ? Please visit http://wifi5.eu/dls/wodaplug.com/EOC-master-slave/Wodaplug1000_EOC/

EOC slave design

WODAPLUG 1000 EOC SLAVE FEATURES:

  • Provide 4 FE ports
  • Support automatic configuration and manual configuration
  • High safety, support the isolation between slaves
  • Adopt the latest chip MSE510CE, the throughput rate can be up to 100M per each port
  • Can limit port rate and the total number of MAC(users)
  • Support 802.1Q Vlan configuration
  • Not need rewires when deploying, and won’t damage the original decoration in the home or office;

WODAPLUG 1000 EOC SLAVE SPECIFICATION:

SpecificationDescription
PortFour 10/100M self-afaptive FE ports(Auto MDI/MDIX)
One Cable port, One TV port
IndicatorLink/Act (Eth port)
Link (Cable)
Power (Power supply)
SYS (System)
RFWork frequency: 7.5~86MHz
Maximum ouput power:107 dBuV
Receiving sensitivity:-25 dBm
Port:F type Female socket(English system)
Output impedance:75Ω
StandardsIEEE 802.3, IEEE 802.3x
IEEE 802.3u Auto MDI (X)
ProtocolTDM /DMA/CSMA
PerformancePhysical layer:1000Mbps
MAC layer: 500Mbps
Modulation ModeOFDM 4096/1024/256/64/16/8-QAM, QPSK, BPSK
Transmission Distance1km by -5 coaxial cable
Encryption128-bit AES
Power supplyExternal, 12V DC,500mA
Dimension138×95×29 mm
Work Temperature0℃~40℃
Storage Temperature-10℃~70℃
Work Humidity20%~85% non-condensation
Storage Humidity10%~90% non-condensation
Power consumption<5W

Interested in test reports and datasheets ? Please visit http://wifi5.eu/dls/wodaplug.com/EOC-master-slave/Wodaplug1000_EOC/