New improved Wodaplug Slave EOC1121R4WL-R410 with better WiFi coverage

New MTK based WiFi slave with 2 antennas and 300Mbps WiFi speed available – EOC1121R4WL-R410 !!! This new MTK chip  based version can offer same features, but need to update SW on your EOC master, can accept same template configuration. WEB based management for this new EOC WiFi slave is differnt, read new users guide!

EOC1121R4WL-R410 modem is the EOC slave based on HomePlug AV solution for
Ethernet access over coax. It works together with EOC master which is based on HomePlug
AV solution as well to construct a two-layer Ethernet data transmission channel on CATV
coax cable, provide the Ethernet access service based on the existing coax cable networking.
EOC1121R4WL-R410 series is based the Mstar chipset solution(510CE chip),with high
anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for
EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC
signal and CATV signal in 87Mhz~1Ghz can run on one cable without interference. The PHY
Layer speed is 600Mbps,the MAC Layer throughput is up to 320Mpbs.
EOC1121R4WL-R410 series WIFI is based the MTK chipset solution.It meets 802.11 b/g/n
technical standards. It has two external antenna, and can support 2.4GHz wireless signal. It
has the characteristics of strong penetrating power and wide coverage. It can provide users
with more efficient data transmission security.

 Based on HomePlug AV solution and Mstar chipset
 7.5-65Mhz frequency for EOC signals., no influence on CATV Service
 PHY Layer speed 600Mbps
 Support data encryption
 4*100M auto-negotiation Ethernet port
 Support the isolation of slave under one master
 Support Port-based VLAN and 802.1q VLAN
 Support bandwidth limited
 Support QOS configuration based on slave port or VLAN.
 Support broadcast storm control.
 Support data packages count
 Automatically get configurations from EOC Master when Newly connected with
powered on
 Support WEB,CLI and SNMP management
 Support on-line upgrading

EOC Specification

Item Parameters EOC1121R4WL-R410
Interface & indicator – RF interface 
1*TV(RF signal) OUTPUT, metric/inch F connector
1*CABLE(MIX)INPUT, metric/inch F connector
Ethernet interface –  4*10/100M auto-negotiation, RJ45
Power interface 1*DC12V power supply interface
LED indicators – 1*power indicator 
1*system indicator
1*CABLE indicator
1*WIFI indicator
LAN indicator(each Ethernet port has 1 indicator)
Performance parameters  RF parameters
Output level:110±5dBuv
Receive sensibility:-65dBuv
Return loss:>16dB
Output impedance:75Ω
Transmission PHY Layer:600Mbps
Throughput on MAC Layer:320Mbps
Modulation Mode  OFDM– 2690-carriers
4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO
Working Mode TDMA/CSMA
Encryption Mode AES-128
Standard  EOC Standard  IEEE P1901(Draft) HomePlug AV
Ethernet Standard – IEEE 802.3, IEEE 802.3x, IEEE 802.3u, IEEE802.1P, IEEE802.1Q
Software Network Management – WEB, CLI, SNMP
Software Features – VLAN, QOS, Bandwidth Control, Broadcast storm limitation
Power supply&Consumption
Power adapter:12VDC 0.5A
Power consumption:<5W
Dimension 160mm(L) x139.5mm(W) x 28.5mm (H)
Weight 0.3kg
Environment Attribute
Work temperature:0~55℃
Stock temperature:-30~60℃
Work humidity:10%~90%, non-condensation
Stock humidity:5%~95%, non-condensation

WIFI Specification

Operating Mode Router or bridge
WIFI antenna 2 external antennas, 1 built in antennas
IEEE 802.11b: 11Mbps
IEEE 802.11g: 54 Mbps
IEEE 802.11n: 300Mbps
Frequency 2.412 ~ 2.472 GHz
Channel 13*Channel, 1,2,3,4,5,6,7,8,9,10,11,12,13
11b : DSSS :
Receive sensitivity
54 Mbps:≤-76dBm
HT20 MCS7:≤-72dBm
HT40 MCS7:≤-68dBm
RF output lever 802.11n: 16.5dBm
Encryption Mode AES, TKIP, WPA, WPA2, WPA-PSK/WPA2-PSK